Skip to main content
Log in
TE Connectivity AMP Connectors 1-1761608-1 — Pin Headers

1-1761608-1 TE Connectivity AMP-Latch Header, 34 Pos 2.54mm

MPN1-1761608-1
Active

TE Connectivity AMP-Latch, 34-position, 2-row, shrouded header, 0.100" (2.54mm) pitch, male pin, through hole, solder termination, latch lock/eject hooks, 1A per contact, 250VAC, UL94 V-0, active production.

$9.8900Ref. price · indicative, final on quote
TE Connectivity AMP Connectors 1-1761608-1 datasheet (PDF)
RoHSROHS3 Compliant
SeriesAMP-Latch
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

1-1761608-1 key specifications
ParameterValue
SeriesAMP-Latch
TypeMale Pin
MountingThrough Hole
Connector typeHeader
Fastening typeLatch Lock/Eject Hooks, Short
Voltage rating250VAC
Current rating1A per Contact
Operating temperature-65°C ~ 105°C
Contact materialPhosphor Bronze
Insulation colorBlack
Insulation height0.404\" (10.26mm)
Insulation materialPolybutylene Terephthalate (PBT)

All specifications

1-1761608-1 additional specifications
ParameterValue
Material flammability ratingUL94 V-0
StyleBoard to Cable/Wire
PackageTube
FeaturesKeying Slot
ShroudingShrouded - 4 Wall
TerminationSolder
Contact shapeSquare
Rows2
Pitch0.100\" (2.54mm)
Positions34
Row spacing - mating0.100\" (2.54mm)
Contact finish - postTin
Contact length - post0.102\" (2.60mm)
Contact finish - matingGold or Gold-Palladium
Contact length - mating0.237\" (6.02mm)
Contact finish thickness - post100.0µin (2.54µm)
Contact finish thickness - mating30.0µin (0.76µm)

Product details

34-position AMP-Latch header for IDC cable assemblies

The 1-1761608-1: This is a 34-position, 2-row, shrouded header from the AMP-Latch series, designed to mate with standard 0.100" pitch IDC ribbon cable sockets. The short latch lock/eject hooks on each end secure the mating cable connector and provide a positive retention that resists vibration — a common failure point on unlatched headers.

Signal-duty current and voltage envelope

It will carry logic-level power, sensor signals, or low-current actuator commands, but not motor drives or heater loads — those need a higher-current connector family.

Frequently asked questions

What connector mates with 1-1761608-1?

The latch lock/eject hooks on the header engage with the corresponding slots on the mating socket. Common mating parts are AMP-Latch series receptacles like 1-746285-3 or equivalent 34-position IDC sockets.

What is the pin pitch for 1-1761608-1?

The mating pitch is 0.100" (2.54mm) and the row spacing is also 0.100" (2.54mm). This is the standard AMP-Latch pitch that matches industry-standard IDC ribbon cable.