Skip to main content
Log in
TE Connectivity AMP Connectors 1-1761686-5 — Pin Headers

1-1761686-5 TE AMP-Latch Header 50 Pos 2.54mm

MPN1-1761686-5
Active

TE Connectivity AMP-Latch, Header, 50 Positions, 0.100" (2.54mm) Pitch, Through Hole, Solder, Shrouded - 4 Wall, Latch Lock/Eject Hooks, Long, Gold Mating Contact, 1A per Contact, 250VAC, -65°C ~ 105°C, UL94 V-0

$19.8500Ref. price · indicative, final on quote
TE Connectivity AMP Connectors 1-1761686-5 datasheet (PDF)
RoHSROHS3 Compliant
SeriesAMP-Latch
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

1-1761686-5 key specifications
ParameterValue
SeriesAMP-Latch
TypeMale Pin
MountingThrough Hole
Connector typeHeader
Fastening typeLatch Lock/Eject Hooks, Long
Voltage rating250VAC
Current rating1A per Contact
Operating temperature-65°C ~ 105°C
Contact materialPhosphor Bronze
Insulation colorBlue
Insulation height0.350\" (8.89mm)
Insulation materialPolybutylene Terephthalate (PBT)

All specifications

1-1761686-5 additional specifications
ParameterValue
Material flammability ratingUL94 V-0
StyleBoard to Cable/Wire
PackageBulk
FeaturesKeying Slot
ShroudingShrouded - 4 Wall
TerminationSolder
Contact shapeSquare
Rows2
Pitch0.100\" (2.54mm)
Positions50
Row spacing - mating0.100\" (2.54mm)
Contact finish - postTin
Contact length - post0.102\" (2.60mm)
Contact finish - matingGold
Contact length - mating0.240\" (6.10mm)
Contact finish thickness - post100.0µin (2.54µm)
Contact finish thickness - mating30.0µin (0.76µm)

Product details

50-Position Shrouded Header with Latch Eject Hooks

Rated at 1A per contact with a 250VAC voltage rating, it suits signal-level interconnects in industrial control, telecom, and computing equipment.

Latch Retention and Keying for Vibration Resistance

The long latch lock/eject hooks provide positive mechanical retention between the header and its mating receptacle, preventing disconnect under vibration. The integrated keying slot ensures the connector pair mates only in the correct orientation, eliminating mis-mating damage in multi-connector panels. This design is common in equipment where cables are frequently disconnected for service or reconfiguration.

Comparison with Peer MPN 1-1871673-2

The 1-1871673-2 includes a board lock feature and detent lock, suiting different board retention needs.

Frequently asked questions

What is the mating connector for 1-1761686-5?

It mates with standard AMP-Latch 50-position IDC receptacles that accept 0.100" (2.54mm) pitch ribbon cable. The latch lock/eject hooks on this header engage the corresponding slots on the receptacle.

Does 1-1761686-5 have latch eject hooks?

Yes, it features long latch lock/eject hooks for positive retention and tool-less unmating.