FPC connector with ZIF flip lock
The 1-1775333-8 is an 18-position member of TE Connectivity's FPC connector line, using a zero-insertion-force (ZIF) flip-lock actuator and bottom-contact design. Rated 0.5A per contact at 250V with gold-plated phosphor bronze contacts, it accepts 0.30mm FPC and sits 2.05mm above the board after SMT solder termination.
Obsolete — sourcing guidance
TE Connectivity AMP Connectors has marked the 1-1775333-8 as Obsolete. Available through independent surplus channels; quantities are lot-specific and confirmed at RFQ.
0.50 mm pitch bottom-contact fit
The 0.50 mm pitch and bottom-contact layout mean the FPC traces route to the lower side of the insertion slot — the mating cable end must be straight and the conductor pattern aligned to the bottom row of contacts. The ZIF flip lock holds the FPC without insertion force; the 2.05 mm height above board suits low-profile stacking where the mezzanine gap is tight.