10-Circuit Power Distribution Strip with Screw Clamps
The 1-1776293-0: The 0.315" (8.00 mm) pitch gives enough space between terminals for the 12 AWG wire the strip accepts, so the full 30 A rating is usable without a wire-size bottleneck. Dual-row layout with 20 wire entries means each circuit has its own entry on both sides of the barrier — handy for daisy-chaining power through the strip.
Enclosed Barriers and Screw Termination
The enclosed barrier design isolates each circuit from its neighbour, preventing accidental shorts from a stray screwdriver or a loose strand of wire. Top termination is via steel screws with a zinc, non-hexavalent chromate finish — corrosion-resistant enough for an industrial cabinet. The bottom termination is closed, so the strip is intended for through-panel wiring where the studs or bus bars pass through the panel and terminate on the underside. The polyamide (PA66) housing carries a UL94 V-2 flammability rating and an operating range of -35°C to 100°C, which covers most indoor control enclosures and mild outdoor cabinets.