10-position, 0.100" pitch through-hole receptacle — AMPMODU HV-100 series
The push-pull fastening means no mechanical latch — the mated pair relies on friction and housing interference, so it is not suited for high-vibration environments without additional retention.
Through-hole termination with kinked pin — solder-joint strain relief
Termination is through-hole with a kinked pin, which provides mechanical retention in the plated through-hole before soldering. The contact length after the board surface is 0.122" (3.10 mm). The square contact shape mates with the square pin of the matching AMPMODU HV-100 header.