It terminates field wiring via screw clamps and accepts 12-26 AWG wire. Rated 10 A at 300 V, it suits control panel wiring, industrial I/O, and power distribution blocks where moderate current and voltage are typical.
Screw termination with a specified torque of 0.5 Nm (4.4 Lb-In) ensures consistent clamping force on solid or stranded wire from 12 AWG to 26 AWG. The plug features retention latches on the non-wire side, which lock the plug into the mating header to resist vibration-induced disconnect.
The closest functional alternative within the same series is 1-2213934-1, which shares the same 12 positions, 5.00mm pitch, screw termination, and 10 A / 300 V rating. The key difference: 1-2213934-1 uses a 180° (straight) wire entry, while 1-2213934-2 uses 270° entry. Choose the 270° version when wire routing requires a right-angle exit from the header axis.