MonoPlug 9-Position IDC Receptacle for Discrete Wire Harnesses
It terminates via IDC — no crimp tool needed at the wire end — and mates directly to a PCB through its 'Mates to PCB' feature, making it a direct-solder-free option for low-to-mid volume harness builds.
Termination and Wire Prep — IDC for Discrete Wire
This receptacle uses insulation displacement contacts (IDC) for 22-24 AWG discrete wire.
Comparison with 1-1703095-1 — Pitch and Position Count
The 1-1703095-1 is a 4-position MonoPlug receptacle at a 0.197" (5.00mm) pitch — double the pitch and fewer than half the positions of the 1-2232890-9. Both use IDC termination, latch lock, and tin contacts, but the 4-position part is for lower-density, higher-current-per-circuit applications where the wider pitch gives more creepage. The 1-2232890-9 is the choice when the circuit count is 9 and the board footprint needs the tighter 0.098" pitch.