Board Layout Fit: 2.00 mm Pitch SMT Receptacle
The 1-2307815-0: Gold on the mating face at 30.0 µinch — that thickness supports 500+ mating cycles minimum in a production or test fixture interconnect, where the connector sees repeated engagement over the equipment life.
Automated Assembly: Pick-and-Place Ready
Cut Tape works for prototype or low-volume builds.
Mating Half and Board Stack Height
The insulation height is 0.177" (4.50 mm) — that sets the z-height budget above the board surface when mated; check the header stack height to confirm clearance in the enclosure.