NECTOR T In-Line Power Receptacle with Backshell
It comes with the backshell fitted, so you get strain relief and cable retention out of the bag. This is the pin side of the NECTOR T system, designed for LED lighting, outdoor signage, and industrial power distribution where you need a sealed, field-installable connection.
IP67/IP68 — Only When It's Mated
The connector carries an IP67 and IP68 ingress rating — dust-tight and waterproof — but that rating is valid only when fully mated and the latch lock is engaged. The shell and insert are molded from PBT/PC blend rated UL94 V-0, so the housing itself won't propagate a flame inside the luminaire.
20A per Circuit — Sized for the Power Rail
Rated 20A per circuit at 600VAC, this is a power interconnect, not a signal line. The cable opening accepts 7.00mm to 10.00mm cable — match the cable OD to the backshell gland to maintain the seal and the strain relief. Screw termination means field termination with common tools; no crimp die needed.