The TE Connectivity 1-480699-8 is a 2-position receptacle housing from the Universal MATE-N-LOK series, designed for panel-mount wire-to-wire or wire-to-board applications where a positive-locking connection is needed. The gray nylon body carries a locking ramp on the mating face, which provides audible and tactile feedback when fully seated against the matching plug housing. This is a housing-only part — the crimp contacts are ordered separately, and the housing accepts both male and female terminals, so the same shell can serve either side of a connection depending on the contact loaded.
What contacts fit this housing
The 1-480699-8 accepts Universal MATE-N-LOK crimp contacts in either male tab or female socket form. The terminal size depends on the wire gauge being terminated — the series covers 20-14 AWG depending on the specific contact part number. Because the housing is unloaded, the buyer must select and order the correct terminal and any required insertion tooling separately. The same housing works for both power and signal circuits within the contact's rated current range.
Panel mounting and retention
The housing snaps into a rectangular panel cutout using integral spring latches on both sides. The snap-in feature holds the connector in place before the mating half is engaged, which simplifies harness assembly in a confined enclosure. The locking ramp on the connector body then secures the mated pair against vibration — the ramp clicks over the matching ramp on the plug and requires a deliberate squeeze on both release levers to separate.