36-Position 4-Row Plug Housing for Multi-Circuit Harnesses
It uses a 4.20 mm pitch with the same 4.20 mm row spacing, giving a dense but serviceable grid for multi-circuit wire-to-wire or wire-to-panel interconnects. Panel-mount snap-in clips let you install the housing into a cutout without fasteners, which is typical for a pass-through harness in an enclosure wall or a bulkhead.
Pitch, Row Count, and Housing Fit
The 4-row arrangement packs 36 circuits into a housing that is wider than a 2-row design at the same pitch — useful when you need to route more conductors through a single connector body without going to a finer pitch.
Panel Mount and Termination
This suits applications where the connector body is fixed to a chassis or enclosure wall and the mating half is a free-hanging plug or receptacle.