SL-156 Receptacle Housing for 10-Circuit Wire-to-Board Harnesses
The natural polyamide (nylon) body carries a board latch fastening system that locks the housing to the mating header, giving the connection vibration resistance in industrial cabinet and automotive interior environments.
Housing-Only — Order Crimp Sockets Separately
The crimp termination gives a gas-tight connection when the correct application tooling is used. Without the contacts, the housing is just the shell — a common sourcing trap when filling a BOM line.
Mates with SL-156 Board-Mount Headers
The mating half for this receptacle housing is a TE SL-156 series board-mount header, typically through-hole or surface-mount, with 0.156" (3.96mm) pitch and 10 positions in a single row. The board latch on the housing snaps over the header's locking ramp, holding the pair mated under vibration. No secondary locking device is needed for most applications, but the latch should be visually confirmed fully engaged during harness assembly.