TE Connectivity AMP Connectors 1-84984-0, FFC/FPC vertical connector, 10 positions, 0.039" (1.00mm) pitch, through-hole kinked-pin termination, tin contacts, 1 A per circuit, -20°C to 85°C operating range.
| Parameter | Value |
|---|---|
| Mounting | Through Hole |
| Cable end type | Straight |
| Flat flex type | FFC, FPC |
| Connector (Contact type) | Contacts, Vertical - 1 Sided |
| Voltage rating | 125V |
| Current rating | 1A |
| Operating temperature | -20°C ~ 85°C |
| Housing color | White |
| Contact material | Phosphor Bronze |
| Housing material | Polybutylene Terephthalate (PBT), Glass Filled |
| Height above board | 0.220\" (5.59mm) |
| Pitch | 0.039\" (1.00mm) |
| Package | Tube |
| Termination | Kinked Pin |
| Contact finish | Tin |
| FFC, FCB thickness | 0.30mm |
| Positions | 10 |
It accepts 0.30 mm thick flat flex cable and mates with a single-sided contact pattern.
The kinked-pin termination locks the connector into the PCB during wave soldering — the kink provides mechanical retention before solder solidifies, reducing skew from cable strain. The straight cable exit keeps the flex parallel to the board surface.
The pitch is 0.039" (1.00 mm), which matches standard 1.00 mm FFC/FPC cable assemblies. Confirm your cable's conductor spacing matches before ordering.
Yes, it is ROHS3 compliant per the manufacturer's listing.
No pin-compatible alternative is listed on the manufacturer's cross-reference.