Housing for a 4-Circuit Junior Power Timer Harness
The 1-929504-1: It uses a 5.00 mm pitch and 0.220" row spacing, giving enough room for 20-16 AWG power and signal circuits in automotive and industrial applications. The natural PBT insulation material handles underhood and cabinet temperatures without issue.
The 5.00 mm pitch is wider than the 2.54 mm or 3.00 mm used on signal connectors, which means each terminal has more creepage distance and can carry higher current without tracking between circuits. For a Junior Power Timer receptacle, this pitch pairs with a crimp terminal rated for the power distribution bus in a vehicle or machine — not for dense signal routing. The 0.220" row spacing keeps the two rows separated enough that you can route wires to both rows without the terminals shorting against each other inside the housing.
The crimp termination means each wire is terminated individually before insertion, and the housing's primary latch locks the pair together with an audible click. No secondary TPA retainer is listed for this housing, so verify the terminal retention force against your application's vibration profile.