10-Position Single-Row Receptacle Housing at 0.100" Pitch
The TE Connectivity AMPMODU MTE 103648-9 is a 10-position, single-row receptacle housing designed for free-hanging (in-line) wire-to-board or wire-to-wire interconnects.
Contacts Not Included — Order Crimp Terminals Separately
The housing does not include contacts. You need to source the matching AMPMODU MTE female crimp socket terminals separately — typically the 0.100" pitch crimp contacts in tin or gold plating depending on the mating cycle and environmental requirements. The 10-position count means a full set of 10 terminals plus a few spares for the build. The crimp termination requires a hand or automatic crimp tool; the series has a standard tooling family that covers the wire range (typically 22-30 AWG, though the exact gauge depends on the terminal selected).
Mating Half and Compatibility
This receptacle housing mates with the AMPMODU MTE 0.100" pitch header (male pin) housings of the same series — typically the 10-position shrouded or unshrouded headers. The single-row, 10-circuit layout is keyed by the housing geometry, so a 10-position header is the only direct mate. The free-hanging design means it is used as a wire harness receptacle, not a board-mounted connector. For a board-mounted counterpart, look for the through-hole or SMT header with the same pitch and position count.