It accepts 16-18 AWG wire and terminates via a standard crimp tool — no soldering required.
If your harness sees frequent disconnect/reconnect in a dusty or humid environment, this contact holds its contact resistance over the long term. Tin contacts at half the cost would frett and rise in resistance under the same duty.
Wire Range and Termination Reality
Rated for 16-18 AWG stranded wire, the 132313-1 uses a standard open-barrel crimp. The die set for the Multimate II contact is specific — a generic die for a different pin family will deform the crimp barrel and give a poor pull-out force. Use the TE-certified tooling (e.g., the PRO-CRIMPER III with the correct die) or an approved equivalent. Bulk packaging means you order by the piece, not on a reel.