PC/104 Stackthrough with 102 Loaded Positions
The TE Connectivity 1375795-5 is a 104-position PC/104 stackthrough connector from the AMPMODU series, with 102 positions loaded. The two unloaded positions are deliberate — they match the PC/104 bus standard's keying or bus-master slot requirement, so verify your bus layout before committing the BOM line. The black housing (UL94 V-0) is the usual colour for this bus form factor, so visual identification in a dense stack is straightforward. Termination is press-fit with a long post. That means no solder — the post compresses into a plated through-hole, which is rework-friendly if you need to swap a board in the stack, but requires a press tool with the correct insertion force profile. The long post length is sized for the standard PC/104 board-to-board spacing; check your stack-up height against the post dimension in the product drawing.