It uses tin-plated female socket contacts and mounts free-hanging (in-line), making it a straightforward choice for harness builders needing a reliable, low-cost wire-to-wire or wire-to-board interconnect.
The 2.20 mm pitch (0.087") is tighter than the more common 2.54 mm pitch, so the board footprint is narrower — confirm your PCB land pattern accommodates this spacing before committing. The tin contact finish is rated for limited mating cycles (typically 25-50 mates), so this connector is best suited for one-time or infrequent mating in a harness assembly, not for frequent disconnect/reconnect duty. The natural housing colour is a visual cue for the standard.025 series; no keying or colour coding is built in, so polarisation relies on the housing geometry.
This receptacle mates with the.025 series male header pins (square 0.025" posts) in a dual-row configuration. The free-hanging housing accepts the matching crimp terminal — typically TE part number 1-1703095-1 or similar.025 series pin header. Termination is by crimp only; no soldering or IDC option is available for this variant. For field assembly, use a hand crimp tool with the correct die set for the terminal wire range.