Skip to main content
Log in
TE Connectivity AMP Connectors 1394026-1 — Connector Housings

TE 1394026-1 MCP 9.5 Plug Housing, 2 Pos, 16.50mm, Sealed

MPN1394026-1
Active

TE Connectivity MCP 9.5 plug housing, 1394026-1, 2 positions, 1 row, 16.50mm pitch, panel mount snap-in, sealed, black PBT, crimp termination, latch holder fastening.

$7.6600Ref. price · indicative, final on quote
RoHSROHS3 Compliant
SeriesMCP 9.5
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Aug 2026

Specifications

1394026-1 specifications
ParameterValue
SeriesMCP 9.5
TypeTab
MountingPanel Mount, Snap-In
Connector typePlug
Fastening typeLatch Holder
Operating temperature-30°C ~ 100°C
ColorBlack
Insulation materialPolybutylene Terephthalate (PBT), Glass Filled
NoteContacts Not Included
Pitch0.650\" (16.50mm)
PackageBulk
FeaturesSealed
Rows1
Contact terminationCrimp
Positions2

Product details

2-Position Sealed Plug Housing, 16.50mm Pitch — MCP 9.5

The housing accepts tab-type male contacts (not included) terminated via crimp, and mates with a corresponding receptacle that carries female terminals. Its 16.50mm pitch provides generous creepage for high-voltage or high-current circuits within a compact 2-circuit layout.

Sealed Housing — IP Rating Valid Only When Mated and Latched

The sealed feature on this housing means the connector pair — plug plus receptacle — achieves an IP rating only when fully mated and the latch holder is engaged. The gasket material (integral to the housing design) seals the interface, but an unmated half sitting open on a panel or harness is not protected. If your application involves washdown cycles or intermittent submersion, cap the open half between connections.

Contacts Not Included — Order Terminals Separately

The listing explicitly notes that contacts are not included. This housing accepts tab-type male crimp terminals — you must order the matching TE MCP 9.5 contact (e.g., part number 1394026-2 or similar) separately.

Panel Mount Snap-In — No Tools Required for Installation

The black PBT housing resists UV and common automotive fluids.

Frequently asked questions

Where can I buy 1394026-1?

The 1394026-1 is sourced to order through independent distribution. Submit an RFQ for current pricing and availability — the supply posture is confirmed at quote time.

What contacts fit 1394026-1?

This housing accepts tab-type male crimp contacts from the MCP 9.5 series (contacts not included). Order the mating TE terminal separately — the exact part number depends on wire gauge and plating preference.

Is 1394026-1 a sealed connector?

Yes, the housing is listed with a sealed feature. The IP rating is valid only when the plug is fully mated with the matching receptacle and the latch holder is engaged. The open half requires a protective cap for washdown environments.