1-Position Power Series 75 Housing — Single-Wire Interconnect Block
It accepts a non-gendered crimp contact — meaning two identical housings mate directly without a dedicated plug/receptacle pair — and the spring retention fastening secures the connection without separate latch hardware. The white polycarbonate (PC) insulation body is rated for the series' power-duty environment, and the stackable feature lets multiple 1-position housings gang together side-by-side into a multi-way assembly, giving the harness builder flexibility to add or remove circuits without changing the connector family.
Stackable Single-Position Architecture — Ganging Circuits Without a Multi-Way Mold
The 1-position format is the defining fit parameter — this is not a multi-circuit block but a modular single-wire housing. The stackable feature means you can nest multiple 1445715-8 housings into a multi-position array, adding or removing circuits as the harness layout demands. This contrasts with a fixed N-position housing that locks you into a specific circuit count. The trade-off: a ganged assembly occupies more width per circuit than a molded multi-way housing, but the modularity simplifies field repair — swap one damaged housing instead of replacing a whole block.
Active Production — No Last-Time-Buy Pressure on This Housing
No obsolescence notice or end-of-life timeline is on record.
Housing-Only — Contacts Ordered Separately
This is a housing-only order code — the crimp terminal must be sourced separately from the Power Series 75 contact portfolio. The non-gendered contact type means the same terminal works in both mating halves. Termination is crimp, field-assembled with a standard tool. Mating halves: any Power Series 75 non-gendered housing of the same series — the spring retention locks the pair together without a secondary clip.