Two-Position IDC Receptacle for Wire-to-Board Harnesses
The TE Connectivity DuoPlug 1534415-2 is a 2-position receptacle that terminates discrete wire using an IDC slot, then mates directly to a PCB — the "Mates to PCB" feature tells you this isn't a wire-to-wire splice but a board-edge interconnect.
IDC Termination — No Crimp, No Strip
The wire type is listed as Discrete, meaning individual conductors rather than ribbon cable, and the contact is a female blade socket that receives the mating male pin on the PCB header.
Sibling Comparison — 1-1703095-1 (4-Position)
The closest functional sibling in the DuoPlug family is the 1-1703095-1, a 4-position receptacle at the same 0.197" (5.00mm) pitch and IDC termination. The difference is the position count: 2 circuits on the 1534415-2 versus 4 circuits on the 1-1703095-1. Both share the natural housing colour, free-hanging mount, tin contacts, and active lifecycle. The 4-position version also carries a Latch Lock fastening feature not listed on the 2-position, which may be a factor for vibration resistance — check the mating header's locking ramp before committing.