Skip to main content
Log in
TE Connectivity AMP Connectors 1735360-4 — FFC / FPC Cable Assemblies

1735360-4 TE Connectivity 1mm Pitch 4-Pin FFC/FPC Connector

MPN1735360-4
Active

TE Connectivity AMP Connectors 1735360-4, FFC/FPC connector, 1.00 mm pitch, 4 positions, bottom contact, tin-plated phosphor bronze contacts, SMT right-angle, beige glass-filled nylon housing, rated 1 A per contact at 125 V.

$0.5500Ref. price · indicative, final on quote
RoHSROHS3 Compliant
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

1735360-4 specifications
ParameterValue
MountingSurface Mount, Right Angle
Cable end typeStraight
Flat flex typeFFC, FPC
Connector (Contact type)Contacts, Bottom
Voltage rating125V
Current rating1A
Operating temperature-20°C ~ 85°C
Housing colorBeige
Contact materialPhosphor Bronze
Housing materialPolyamide (PA), Nylon, Glass Filled
Height above board0.118\" (3.00mm)
Pitch0.039\" (1.00mm)
PackageTape & Reel (TR) Cut Tape (CT)
TerminationSolder
Contact finishTin
FFC, FCB thickness0.30mm
Positions4

Product details

1.00 mm pitch, 4-position bottom-contact FFC/FPC connector

It accepts 0.30 mm thick flat flex cable and mates with standard 4-pin FFC or FPC assemblies.

Tin plating and bottom-contact layout

Tin-plated phosphor bronze contacts keep per-unit cost low but limit mating cycles compared to gold-flash alternatives. The bottom-contact arrangement means the FFC conductor pads face the PCB — confirm your flex circuit pad orientation before layout. Height above board is 3.00 mm, which suits low-profile board stacking where vertical clearance is tight.

Frequently asked questions

Is 1735360-4 compatible with standard 4-pin FFC cables?

Yes. The connector accepts 0.30 mm thick FFC or FPC with 1.00 mm pitch and bottom-contact pads. The cable end type is straight, so a standard straight FFC mates without a bend.