Skip to main content
TE Connectivity AMP Connectors 1776119-6 — Wire-to-Board Headers

TE Connectivity Buchanan 1776119-6

MPN1776119-6
Active

TE Connectivity Buchanan 1776119-6, 6-position PCB terminal block, 5.08 mm pitch, 13.5 A, 300 V, through-hole, screw rising cage clamp, black.

$2.9400Ref. price · indicative, final on quote
RoHSROHS3 Compliant
SeriesBuchanan
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Aug 2026

Specifications

1776119-6 specifications
ParameterValue
SeriesBuchanan
MountingThrough Hole
Voltage300 V
Current13.5 A
Wire gauge16-30 AWG
Wire terminationScrew - Rising Cage Clamp
ColorBlack
Housing materialPolyamide (PA), Nylon
Clamp material - platingBrass - Nickel Plated
Screw material - platingBrass - Nickel Plated
Contact material - platingBrass - Tin Plated
Pitch0.200\" (5.08mm)
PackageBulk
Screw threadM3
Torque - screw0.68 Nm (6 Lb-In)
Number of levels1
Mating orientationHorizontal with Board
Positions per level6

Product details

6-Position 5.08 mm Pitch PCB Terminal Block with Rising Cage Clamp

The TE Connectivity Buchanan 1776119-6 is a 6-position, single-level PCB terminal block on a 5.08 mm pitch, rated for 13.5 A at 300 V. It terminates wires from 16 to 30 AWG using a screw-driven rising cage clamp — the screw tightens a brass, nickel-plated clamp that pulls the wire up against the current bar, giving a gas-tight connection that holds under thermal cycling and vibration. The black polyamide housing is rated UL94 V-0 (implied by the Buchanan series standard) and mounts through-hole, with the wire entry oriented horizontally to the board.

13.5 A Continuous Rating and 300 V Isolation

That current is limited by the screw clamp contact resistance and the wire gauge — at 16 AWG the full 13.5 A is available; at 30 AWG the wire itself becomes the fuse. For a 5.08 mm pitch, the creepage between adjacent terminals is about 5 mm, which comfortably supports 300 V in pollution degree 2 environments.

Screw Termination and Torque Specification

Wire termination uses an M3 screw with a specified torque of 0.68 Nm (6 Lb-In). The rising cage clamp design — brass, nickel-plated — lifts the wire into the current bar as the screw is tightened, creating a high-pressure contact area that resists loosening from thermal expansion. The clamp accepts solid, stranded, or ferruled wire. The screw is captive in the housing, so it cannot be lost during field wiring. The specified torque is not optional: under-tightening leaves a high-resistance joint that heats under load; over-tightening strips the M3 thread in the polyamide housing.

Board Layout and Pitch Compatibility

The 5.08 mm pitch is a standard 0.200-inch spacing common to many European-style terminal blocks. The through-hole pins are on that pitch, so the PCB footprint requires a row of 6 holes spaced 5.08 mm apart, typically 1.0 to 1.3 mm diameter depending on the pin cross-section. The 5.08 mm pitch does not match 5.00 mm metric pitch boards; confirm the hole spacing before layout.

The 1776119-6 is an active, in-production part from TE Connectivity's Buchanan series.

Frequently asked questions

Where can I buy 1776119-6 and what is the lead time?

Submit an RFQ for a firm quote and delivery estimate.

Can 1776119-6 handle 13.5 A continuously at 300 V?

Yes, the 1776119-6 is rated for 13.5 A per position at 300 V continuously, provided the wire gauge is adequate (16-30 AWG) and the PCB layout provides proper creepage and clearance. The rating assumes the terminal block is mounted on a PCB in still air at 25 °C ambient; derate above that temperature per the manufacturer's derating curve.

What is the difference between 1776119-6 and 1776119-5?

The 1776119-6 is a 6-position terminal block; the 1776119-5 is a 5-position variant. Both share the same 5.08 mm pitch, 13.5 A rating, 300 V rating, screw rising cage clamp termination, and black polyamide housing. The only difference is the number of positions, which changes the overall length of the block and the number of PCB holes required.

Is 1776119-6 compatible with 5 mm pitch boards?

No, the 1776119-6 has a 5.08 mm (0.200 inch) pitch. This is a standard 0.200-inch spacing, not 5.00 mm metric. The 0.08 mm difference per position accumulates to 0.48 mm across 6 positions — enough to misalign the pins with a 5.00 mm pitch PCB footprint. Use the specified 5.08 mm pitch for the board layout.