Six-Circuit Barrier Strip for 65A Feeds
The Buchanan TSB2000 1776313-6 is a six-circuit Eurostyle terminal strip built for pulling 65A per circuit at 600V. That 0.571" (14.50mm) barrier-to-barrier spacing gives you the creepage to hold that voltage without tracking, even in a damp panel. The enclosed barrier design keeps a stray screwdriver or a dropped washer from bridging the terminals — a detail that matters when you're terminating 6 AWG feeders.
What the 65A and 600V Ratings Mean on the Panel
The 600V rating, paired with the enclosed barrier, means it's rated for 480V industrial distribution without derating. The steel screws with zinc, non-hexavalent chromate finish resist corrosion in a cabinet that sees condensation cycles. Wire range 6-14 AWG covers the common feeder and branch sizes; a ring lug under the screw is the right termination for the heavy stuff.
Chassis or panel mount — the strip has no DIN rail foot, so you bolt it directly to the panel backplate. Top termination is screws; bottom is closed, meaning the screw terminals are the only wire entry point. Two rows of wire entries (12 total) let you land incoming and outgoing conductors on opposite sides of the same barrier. Operating range is -35°C to 100°C.