The TE Connectivity Dynamic D-5200 1903146-2 is a 12-position plug connector built for panel-mount power distribution. The 0.400" (10.16mm) pitch and 3-row layout give each circuit enough physical separation to handle higher voltages without tracking across the housing — a common requirement in industrial control cabinets and power supply units where creepage distance is a design constraint. The mounting flange anchors the plug to the panel face, taking the strain off the solder tails when the mating receptacle is latched or unlatched under tension.
This plug mates with the Dynamic D-5200 series receptacle housing that carries the corresponding female blade socket contacts. The solder termination on the plug side means the cable is soldered directly to the tab contacts — a permanent, low-resistance joint suited for panel wiring where the connector body stays fixed and the harness side uses a crimp-style receptacle. The discrete wire type confirms individual wires, not ribbon cable, are intended.