TE Connectivity CT Amp-In, IDC connector, 7 positions, 0.079" (2.00mm) pitch, single row, right-angle through-hole, tin contacts, 26-28 AWG, yellow housing.
| Parameter | Value |
|---|---|
| Series | CT Amp-In |
| Mounting | Through Hole, Right Angle |
| Connector type | Individual Wires |
| Wire gauge | 26-28 AWG |
| Cable pitch | 0.079\" (2.00mm) |
| Cable termination | IDC |
| Color | Yellow |
| Package | Tray |
| Contact finish | Tin |
| Rows | 1 |
| Board-Side pitch | 0.079\" (2.00mm) |
| Positions | 7 |
The yellow housing provides visual circuit identification on the harness — useful when multiple connector colors run to the same board edge. Both the cable pitch and board-side pitch are 0.079" (2.00mm), so the wire spacing matches the PCB footprint without fan-out.
The 26-28 AWG range covers common signal-level wire gauges for ribbon and discrete harnesses.
This is a wire-to-board IDC connector that terminates directly to the PCB via through-hole solder. It does not use a separate mating receptacle — the IDC contacts connect the wires to the board in one assembly step.