Skip to main content
Log in
TE Connectivity AMP Connectors 2-2106003-2 — Direct Wire-to-Board

TE Connectivity 2-2106003-2, 2-Pos IDC Connector, 4mm Pitch

MPN2-2106003-2
Active

TE Connectivity 2-2106003-2, 2-position IDC wire connector, 0.157" (4.00mm) pitch, single row, 22 AWG, surface mount right-angle, tin contacts, natural housing.

$0.4421Ref. price · indicative, final on quote
TE Connectivity AMP Connectors 2-2106003-2 datasheet (PDF)
RoHSROHS3 Compliant
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Aug 2026

Specifications

2-2106003-2 specifications
ParameterValue
MountingSurface Mount, Right Angle
Connector typeIndividual Wires
Wire gauge22 AWG
Cable pitch0.157\" (4.00mm)
Cable terminationIDC
ColorNatural
PackageTape & Reel (TR) Cut Tape (CT)
FeaturesClosed End
Contact finishTin
Rows1
Board-Side pitch0.157\" (4.00mm)
Positions2

Product details

What This Connector Does in the Assembly

Sizing the Wire and the Footprint

The IDC termination is specified for 22 AWG wire only — the insulation diameter and conductor cross-section are fixed by the connector design. The 0.157" (4.00mm) board-side pitch sets the SMD pad spacing; a two-position footprint is compact, with the right-angle orientation keeping the connector body off the board surface. The natural housing colour is the visual identifier for this variant — no keying or colour coding beyond that.

Frequently asked questions

What is the exact description of TE Connectivity 2-2106003-2?

The TE Connectivity 2-2106003-2 is a 2-position, single-row IDC wire connector for 22 AWG, with a 0.157" (4.00mm) pitch, surface mount right-angle termination, tin contacts, and a natural housing.

What wire gauge does 2-2106003-2 support?

The 2-2106003-2 is specified for 22 AWG wire, terminated via IDC — no stripping required, but the wire diameter must match the connector's insulation displacement slot.