Skip to main content
Log in
TE Connectivity AMP Connectors 2-2834075-3 — LED Lighting Connectors

TE Connectivity SlimSeal 2-2834075-3

MPN2-2834075-3
Active

TE Connectivity SlimSeal series, Receptacle Housing for Pin Contact, 2-2834075-3, 3 positions, 0.098" (2.50mm) pitch, 3.5A/5A current rating, 400V voltage, IP67, Crimp termination, Free Hanging (In-Line), Latch Holder fastening.

$0.7500Ref. price · indicative, final on quote
TE Connectivity AMP Connectors 2-2834075-3 datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

2-2834075-3 specifications
ParameterValue
SeriesSlimSeal
MountingFree Hanging (In-Line)
Connector typeReceptacle Housing for Pin Contact
Fastening typeLatch Holder
Voltage rating400V
Current rating3.5A, 5A
IP ratingIP67 - Dust Tight, Waterproof
Operating temperature-40°C ~ 105°C
Housing colorBlack
Housing materialPolybutylene Terephthalate (PBT)
Pitch0.098\" (2.50mm)
StyleCable/Wire to Cable/Wire
PackageTray
TerminationCrimp
Mating cycles30
Positions3

Product details

SlimSeal Receptacle Housing, 3 Circuits, IP67 Sealed

The 2.50mm pitch keeps the assembly compact while the 400V voltage rating and dual current rating (3.5A, 5A) suit it for power distribution in space-constrained, sealed environments.

IP67 Sealing and 30 Mating Cycles — Field Service Planning

The IP67 rating means the mated pair withstands dust ingress and temporary water immersion — suited for outdoor lighting, agricultural equipment, or marine electronics where moisture is a risk. The 30 mating cycle rating is low; this connector is designed for infrequent disconnect events (installation and occasional maintenance), not daily reconnection. The latch holder provides audible and tactile feedback during mating, confirming full engagement before the seal is compressed.

Frequently asked questions

What is the mating connector for 2-2834075-3?

The mating half is the TE Connectivity 2-2834074-3 plug housing from the same SlimSeal series. It accepts socket contacts and uses a latch lock fastening type to secure the mated pair.

What contacts fit 2-2834075-3 SlimSeal housing?

This receptacle housing accepts crimp pin contacts. The specific TE part number for the pin contact is not listed in this record, but the housing is designed for the SlimSeal series pin contacts — consult the series application note for the exact contact order code.