TE Connectivity AMP 84981 series FFC / FPC connector, 20 positions, 1.00 mm pitch, top-contact, surface mount right-angle, rated 1 A per contact at 125 V, tin-plated phosphor bronze contacts, beige glass-filled nylon housing, solder retention, 0.30 mm cable thickness
| Parameter | Value |
|---|---|
| Mounting | Surface Mount, Right Angle |
| Cable end type | Straight |
| Flat flex type | FFC, FPC |
| Connector (Contact type) | Contacts, Top |
| Voltage rating | 125V |
| Current rating | 1A |
| Operating temperature | -20°C ~ 85°C |
| Housing color | Beige |
| Contact material | Phosphor Bronze |
| Housing material | Polyamide (PA), Nylon, Glass Filled |
| Height above board | 0.118\" (3.00mm) |
| Pitch | 0.039\" (1.00mm) |
| Package | Tape & Reel (TR) Cut Tape (CT) |
| Features | Solder Retention |
| Termination | Solder |
| Contact finish | Tin |
| FFC, FCB thickness | 0.30mm |
| Positions | 20 |
A flipped cable shorts the wrong row, so confirm the cable side before assembly. Accepts FPC or FFC cable 0.30 mm thick — match the cable thickness to the actuator; thicker cable jams the flip-lock, thinner loses retention.
The pitch is 0.039" (1.00 mm). This 20-position connector uses 1.00 mm spacing, which sets the PCB footprint and cable routing density.
Yes, it is surface mount, right-angle. The connector sits 3.00 mm above the board and uses solder retention pads to anchor during reflow.