37-Position D-Sub Plug, Through-Hole Solder Termination
The TE Connectivity AMPLIMITE HD-20 208009-1 is a 37-position D-sub plug with male pins arranged in two rows. It uses through-hole solder tails for a permanent board mount and carries a shell size 4 (DC, C) layout — the standard mechanical envelope for a 37-position D-sub. The unthreaded housing flange means the mating receptacle must supply the threaded insert or the assembly relies on an alternative jack-screw locking method.
6 A per Contact — Signal-Grade Current Capacity
Rated 6 A per contact. Gold flash plating thickness is not specified as a minimum value.
Mating Half — Standard D-Sub Receptacle
The unthreaded flange means the receptacle side must provide the threaded insert for jack-screw locking, or the assembly uses a slide-lock or screw-lock system. The through-hole solder tails match a standard 0.108-inch (2.74 mm) row-to-row footprint — confirm the PCB layout against the product drawing before committing.