4.3/10 RF Plug for 1/2" Super Flex — 2081971-1
The TE Connectivity 2081971-1 is a 4.3/10 series plug, male pin connector designed for 1/2" Super Flex coaxial cable. The connector uses a threaded fastening system for secure mating, and the center contact is silver-plated bronze. The body is brass with a white bronze finish, and the dielectric is PTFE. Termination is by crimp or solder, with a clamp-style shield termination.
The 50 Ohm impedance and 6 GHz bandwidth make this connector suitable for wireless infrastructure, broadcast, and antenna feed applications where 1/2" Super Flex cable is used. The 2500 V rating is notably high for a connector of this class, suiting it for high-power RF transmit paths where voltage standoff matters. The silver-plated center contact and bronze material provide good conductivity and corrosion resistance for outdoor or exposed installations.
Mechanical and Installation Notes
This is a free-hanging, right-angle plug — the right-angle body allows cable routing close to the panel or bulkhead. The threaded coupling provides vibration-resistant mating. Termination is via crimp or solder for the center contact, with a clamp for the shield. The 100 mating cycle rating is typical for infrastructure connections that are mated once or a few times during installation and then left in place. The silver body finish and brass construction offer a balance of RF performance and mechanical durability.