Poke-In Wire Receptacle for Board-to-Cable Interconnects
It uses a 0.130" (3.30mm) pitch and is rated at 2A per circuit with a 400V voltage rating. The connector accepts 24-26 AWG wire and terminates via solder to the PCB using a surface-mount, bottom-entry, through-board mounting style. The housing is natural thermoplastic with tin-plated copper alloy contacts, and includes a cover and solder retention features for reliable assembly.
Pitch, Wire Range, and Mounting
The 0.130" (3.30mm) pitch is the key board-fit dimension — it determines the PCB footprint spacing. The 24-26 AWG wire range means this receptacle is intended for signal-level wiring, not heavy power conductors. The surface-mount, bottom-entry, through-board mounting style allows the connector to sit flush on the board, with the poke-in wire entry on the opposite side, saving vertical space in tight enclosures.
Current and Voltage Ratings
Rated 2A per circuit at 400V, this is a signal-level interconnect. The 400V rating is high relative to the current, indicating good creepage distance for the 3.30mm pitch — suitable for applications where voltage spikes or isolation requirements exist, but the load current stays under 2A per contact.