Skip to main content
225395-3 — TE Connectivity AMP Connectors product photo

TE Connectivity 225395-3 BNC Plug, Male Pin, 50 Ohm, 4 GHz

MPN225395-3
Active

TE Connectivity BNC plug, male pin, 50 Ohm, crimp termination, 4 GHz, 500 mating cycles, includes contact and ferrule, RG-55/223 cable group, nickel body.

$7.1400Ref. price · indicative, final on quote
StockIn Stock (38)
Lead timeIn Stock wk
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.

Specifications

225395-3 Technical Specifications
ParameterValue
Mounting typeFree Hanging (In-Line)
Connector typePlug, Male Pin
Fastening typeBayonet Lock
Voltage rating500 V
Frequency - max4 GHz
Cable groupRG-55, 55A, 55B, 223
Operating temperature-55°C ~ 85°C
Body materialBrass
Housing colorSilver
Dielectric materialPolytetrafluoroethylene (PTFE)
Center contact materialBrass
PackageBulk
Includes3 pcs - 1 Connector, 1 Contact, 1 Ferrule
Impedance50 Ohms
Body finishNickel
Mating cycles500
Insertion loss0.2dB
Number of ports1
Shield terminationCrimp
Contact terminationCrimp
Center contact platingGold

Product details

BNC Plug for RG-55/223 — Kit Includes Contact and Ferrule

The 225395-3: This plug is built for RG-55, RG-55A, RG-55B, and RG-223 cable — the common double-shielded 50 Ohm coax types used in instrumentation and low-power RF.

RF Performance and Mating Life

The 500 mating cycles mean it will survive daily reconnections on a test bench for years before the gold-on-brass centre contact shows wear. The 500 V voltage rating covers the peak levels you'd see in 50 Ohm test equipment and most RF amplifier stages; the limiting factor at higher frequencies is the connector's VSWR, not the dielectric breakdown.

Frequently asked questions

Does 225395-3 include the contact and ferrule?

Yes. You don't need to order those separately.

What is the impedance of 225395-3?

50 Ohms nominal, standard for BNC connectors used in RF test and communications equipment.