2-Position IDC Receptacle for Discrete or Ribbon Cable
It terminates discrete or ribbon cable via insulation displacement, eliminating the need for individual crimp terminals. The 2.00 mm pitch matches the standard AMPMODU 2mm header footprint, making this a direct mate for board-mount pin strips.
Rated for 26-30 AWG wire, the IDC slot accepts solid or stranded conductors within that range. The closed-end feature prevents wire over-insertion past the contact beam. For a harness builder, this means no crimp tool, but the wire insulation OD must be compatible with the slot width — check the TE application spec for the recommended strip length and insertion force.
The 2-position count is the BOM line match — confirm the header is also 2 positions, single row. No latch or locking feature is listed on this variant; for vibration-prone applications, consider a header with a detent or friction lock.