Skip to main content
Log in
2406840-1 — TE Connectivity AMP Connectors product photo
TE Connectivity AMP Connectors

TE Connectivity 2406840-1 SMPM Plug, 40 GHz, 50 Ohm

MPN2406840-1
Active

TE Connectivity Blind-Mate Coaxial series SMPM plug, male pin, 50 Ohm, DC to 40 GHz, 175 V, gold-plated brass body, solder termination for 0.034" semi-rigid cable, free-hanging snap-on coupling, 100 mating cycles.

$18.7000Ref. price · indicative, final on quote
2406840-1 datasheet
StockIn Stock (29)
Lead timeIn Stock wk
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.
How we verify every order →

Specifications

2406840-1 Technical Specifications
ParameterValue
SeriesBlind-Mate Coaxial
Mounting typeFree Hanging (In-Line)
Connector typePlug, Male Pin
Fastening typeSnap-On
Voltage rating175 V
Frequency - max40 GHz
Cable group0.034\" Semi Rigid
Operating temperature-40°C~125°C
Body materialBrass
Housing colorGold
Dielectric materialPolytetrafluoroethylene (PTFE)
Center contact materialBeryllium Copper
PackageBag
Impedance50Ohm
Body finishGold
Mating cycles100
Number of ports1
Shield terminationSolder
Contact terminationSolder
Center contact platingGold

Product details

SMPM Blind-Mate Coaxial Plug for 40 GHz Signal Paths

The TE Connectivity 2406840-1 is an SMPM plug, male pin, from the Blind-Mate Coaxial series. This plug is rated DC to 40 GHz at 50 Ohm impedance, with a voltage rating of 175 V. The PTFE dielectric maintains consistent impedance through the signal path.

Cable Termination and Mechanical Fit

The free-hanging (in-line) mounting with snap-on fastening means no threaded coupling — the connector pushes onto a mating SMPM jack and locks with a detent. This is a single-port, single-position plug; no board footprint is required.

Frequently asked questions

What cable is compatible with 2406840-1?

The 2406840-1 is designed for 0.034" semi-rigid coaxial cable. The centre conductor and shield are both solder-terminated, so the cable jacket diameter and dielectric must match the connector's internal bore dimensions specified in the TE product drawing.