Skip to main content
TE Connectivity AMP Connectors 282857-9 — Wire-to-Board Headers

TE Buchanan 282857-9 Terminal Block, 9 Pos, 5.08mm, 24 A

MPN282857-9
Active

TE Connectivity Buchanan 282857-9, 9-position PCB terminal block, 5.08 mm pitch, 24 A, 300 V, green, rising cage clamp, M3 screw, through-hole, horizontal wire entry.

$7.3400Ref. price · indicative, final on quote
RoHSROHS3 Compliant
SeriesBuchanan
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Aug 2026

Specifications

282857-9 key specifications
ParameterValue
SeriesBuchanan
MountingThrough Hole
Voltage300 V
Current24 A
Wire gauge12-30 AWG
Wire terminationScrew - Rising Cage Clamp
ColorGreen
Housing materialPolyamide (PA66), Nylon 6/6
Clamp material - platingBrass - Nickel Plated
Screw material - platingBrass - Nickel Plated
Contact material - platingBrass - Tin Plated
Pitch0.200\" (5.08mm)

All specifications

282857-9 additional specifications
ParameterValue
PackageBulk
FeaturesInterlocking (Side)
Screw threadM3
Torque - screw0.79 Nm (7.0 Lb-In)
Number of levels1
Mating orientationHorizontal with Board
Positions per level9

Product details

What This Buchanan Terminal Block Is

The TE Connectivity Buchanan 282857-9 is a 9-position, single-level PCB terminal block from the Buchanan series, designed for permanent wire-to-board termination in power distribution and control wiring applications. The green polyamide (PA66) housing carries the rising cage clamp termination — the M3 screw drives a brass clamp that pulls the wire against the current bar, giving a gas-tight connection across the full 12-30 AWG range.

Key Ratings and Termination Specs

Rated 24 A at 300 V, the 282857-9 is built for branch-circuit power levels — one terminal block can carry a lighting circuit or a small motor feed. The rising cage clamp is the key termination detail: the screw torque of 0.79 Nm (7.0 Lb-In) is the field reference — the installer needs a calibrated driver to hit that spec. Under-torque leaves a high-resistance joint that heats under load; over-torque strips the M3 brass threads. The clamp material is brass with nickel plating, the screw is brass with nickel plating, and the contact bar is brass with tin plating — the tin plating on the current path is standard for stationary terminations where mating cycles are not a factor.

The 5.08 mm pitch sets the hole pattern: a standard 0.200-inch grid, compatible with many European terminal block footprints. The interlocking side feature allows multiple blocks to be ganged side-by-side on the same rail without gaps, forming a continuous terminal strip of any position count. The single-level design means all nine positions are on one row, simplifying routing compared to a two-level block.

Position Count Variants in the 282857 Series

The 282857 family covers several position counts at the same 5.08 mm pitch and 24 A rating. The 9-position 282857-9 sits above the 7-position 282857-7 and the 6-position 282857-6, and below the 4-position 282857-4. All other specs (pitch, current, voltage, torque, wire gauge, screw thread, housing material, color) are identical across the family, so the choice is purely the number of circuits on the BOM.

It is a current-production part from TE Connectivity's Buchanan line, sourced through independent distribution.

Frequently asked questions

Where can I buy the 282857-9 terminal block?

The 282857-9 is sourced to order through independent distribution.

What is the pitch of 282857-9?

The pitch is 0.200" (5.08 mm), which sets the PCB hole spacing for the through-hole pins.

What is the current rating of 282857-9?

The current rating is 24 A per position at 300 V, suitable for branch-circuit power wiring.

What wire gauge does 282857-9 accept?

The rising cage clamp accepts 12-30 AWG wire, covering from heavy power conductors to fine signal wires.

What is the torque specification for 282857-9?

The M3 screw torque is 0.79 Nm (7.0 Lb-In) — use a calibrated driver to hit this spec for a reliable connection.