It carries a 20A per-circuit rating at 400V, placing it firmly in the power-distribution class rather than signal duty. The natural polyamide (PA66, glass-filled) housing carries an IP20 ingress rating, so it belongs inside a dry enclosure, not in a washdown or outdoor path.
Sizing the Power Path — 20A and 400V in a 7-Position Housing
The 20A per-contact rating at 400V means each circuit can carry bus-level current — think a main DC rail, a motor phase, or a heater circuit, not a sensor line. The 7-position count is unusual; most power connectors land on even numbers, so double-check the BOM line count before committing.
Mating Half and Keying — What It Connects To
As a receptacle housing for pin contacts, the 293722-2 mates with the matching Nector M plug housing that accepts socket (female) crimp contacts. The keyed feature ensures the connector can only be mated in one orientation — a practical safeguard in multi-connector harness assemblies where polarity matters. The free-hanging design means both halves are in-line, so the mated pair forms a cable-to-cable or cable-to-board link without panel or PCB anchors.