DuoPlug 3-Position IDC Receptacle
One row, free-hanging mount — mates directly to a PCB header.
This works reliably with 22-24 AWG solid or stranded wire, but the wire must be round and within the specified gauge range; flat or tinsel wire won't seat. No crimp tool needed, but a proper IDC press ensures consistent insertion depth across all three positions.
The receptacle mates to a PCB header — the 'Mates to PCB' feature means the female blades accept male pins on a board-mounted header with the same 0.098" (2.50mm) pitch. The 1-row, 3-position layout is keyed by the housing geometry; verify the header's pin arrangement matches before committing the BOM line.