Flanged press-fit pin for fixed board stand-off
The 3-60803-1 is a single-post pin from TE Connectivity's 60803 base series — a press-fit terminal with a flanged shoulder that sets a repeatable above-board height of 0.160" (4.06mm). The flange diameter is 0.090" (2.29mm), and the pin diameter above the flange is 0.058" (1.47mm) — this is the dimension that must match the mating receptacle or wire-wrap tooling. The press-fit tail is designed for a mounting hole diameter of 0.046" to 0.050" (1.17mm to 1.27mm) and a board thickness range of 0.062" to 0.093" (1.57mm to 2.36mm). Overall length is 0.375" (9.53mm); the portion below the flange measures 0.150" (3.81mm), which defines the press-in depth and the tail length available for the through-hole solder pad if a secondary solder operation is used.
Gold plating and contact material for repeated mating
The pin is non-insulated, so it is a bare metal post intended for direct contact with a mating receptacle or a wire-wrap connection — no plastic shroud to protect against accidental shorting.
Supplied in Bulk packaging — the pin is loose in a bag or tube, not taped for automated placement; a pick-and-place feeder would require a different package variant.