7-Position IDC Receptacle at 0.156" Pitch
It terminates 24 AWG wire through the insulation-displacement slot — no stripping or crimping needed. The 0.156" (3.96mm) pitch matches the standard MTA-156 header footprint, and the single-row layout keeps the cable exit inline with the board edge.
Termination and Wire Sizing
It is sized for 24 AWG only; the slot geometry does not accept other gauges reliably. Tin is adequate for one-time assembly into a harness; for repeated disconnect-reconnect duty, the mating header should use tin contacts as well to avoid galvanic mismatch.
The polarizing key ensures the connector cannot be inserted backward. For panel-feed applications, the closed end blocks the connector from passing through a cutout, which keeps the termination inside the enclosure.