TE Connectivity AMP 3-84982-0, FFC/FPC connector, 30 positions, 1.00 mm pitch, vertical SMD, tin-plated phosphor bronze contacts, beige glass-filled nylon housing, -20°C to 85°C, 1 A, 125 V.
| Parameter | Value |
|---|---|
| Mounting | Surface Mount |
| Cable end type | Straight |
| Flat flex type | FFC, FPC |
| Connector (Contact type) | Contacts, Vertical - 1 Sided |
| Voltage rating | 125V |
| Current rating | 1A |
| Operating temperature | -20°C ~ 85°C |
| Housing color | Beige |
| Contact material | Phosphor Bronze |
| Housing material | Polyamide (PA), Nylon, Glass Filled |
| Height above board | 0.220\" (5.59mm) |
| Pitch | 0.039\" (1.00mm) |
| Package | Tape & Reel (TR) Cut Tape (CT) |
| Termination | Solder |
| Contact finish | Tin |
| FFC, FCB thickness | 0.30mm |
| Positions | 30 |
This is a single-sided contact design — the FPC cable inserts straight in, contacting one side only. The beige glass-filled nylon housing provides the structural hold.
The connector accepts FPC cables 0.30 mm thick. The cable end must be straight (not angled) and the contacts engage on one side only — verify the cable's conductor pattern matches the connector's contact layout before assembly.
The connector accepts FPC cables 0.30 mm thick. Cables must be straight-end (not angled) and single-sided conductor pattern.
The pitch is 1.00 mm (0.039 inches).