TE Connectivity AMP Connectors FPC connector, 50 positions, 0.50mm pitch, right-angle SMT, ZIF slide-lock actuator, gold flash contacts, 0.5A per circuit, -20°C to 85°C operating range.
| Parameter | Value |
|---|---|
| Mounting | Surface Mount, Right Angle |
| Cable end type | Tapered |
| Flat flex type | FPC |
| Connector (Contact type) | Contacts, Top |
| Voltage rating | 250V |
| Current rating | 0.5A |
| Operating temperature | -20°C ~ 85°C |
| Housing color | Natural |
| Actuator color | Ivory |
| Contact material | Phosphor Bronze |
| Housing material | Thermoplastic |
| Actuator material | Thermoplastic |
| Parameter | Value |
|---|---|
| Height above board | 0.081\" (2.05mm) |
| Material flammability rating | UL94 V-0 |
| Pitch | 0.020\" (0.50mm) |
| Package | Tape & Reel (TR) Cut Tape (CT) |
| Features | Solder Retention, Zero Insertion Force (ZIF) |
| Termination | Solder |
| Contact finish | Gold |
| Locking feature | Slide Lock |
| FFC, FCB thickness | 0.30mm |
| Positions | 50 |
| Contact finish thickness | Flash |
The 0.5A per-contact rating and 250V voltage rating are typical for signal-level FPC interconnects; the limiting factor is the narrow pitch and the flex circuit's own current capacity.
Right-angle SMT mounting with a 2.05mm height above board — this footprint is standard for 0.50mm pitch FPC connectors. The ivory actuator is a visual cue that the lock is engaged.
Yes, it is a Zero Insertion Force (ZIF) connector with a slide lock. The FPC inserts without force on the contacts, then the slide lock secures it.
The pitch is 0.50mm and it has 50 positions. This is a standard high-density FPC interface for signal routing.