7-Position FFC Connector, 2.54mm Pitch, Vertical Through-Hole
The 5-520315-7: It accepts FFC cable thickness from 0.13mm to 0.38mm and mates with a one-sided contact pattern. The 2.54mm pitch is a standard footprint for signal-level interconnects in control panels, test equipment, and industrial electronics where the board layout is not space-constrained.
It is RoHS compliant.
This is a vertical through-hole connector with kinked pin termination — the pins lock into the PCB for retention during wave soldering. The contact style is one-sided, meaning the FFC cable has conductors on one side only; the connector contacts wipe the exposed pads on insertion. The 0.273" (6.93mm) height above board is the z-height budget to plan for in the enclosure. With only 25 mating cycles, the tin plating will wear with each mate. In a production environment where the cable is disconnected once during assembly and once in the field, the connector has adequate margin. For applications requiring frequent cable swaps, a connector with gold-plated contacts and a higher cycle rating would be a better fit.