Skip to main content
Log in
5227222-1 — TE Connectivity AMP Connectors product photo
TE Connectivity AMP Connectors

TE Connectivity 5227222-1 BNC Jack, 50 Ohm, 4 GHz, Bulkhead

MPN5227222-1
Active

TE Connectivity BNC jack, female socket, 50 Ohm, 4 GHz, 500 V, panel mount bulkhead, bayonet lock, solder termination, 1 port.

$4.3200Ref. price · indicative, final on quote
5227222-1 datasheet
StockIn Stock (53)
Lead timeIn Stock wk
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.
How we verify every order →

Specifications

5227222-1 Technical Specifications
ParameterValue
Mounting typePanel Mount, Through Hole
Connector typeJack, Female Socket
Fastening typeBayonet Lock
Voltage rating500 V
Frequency - max4 GHz
Mounting featureBulkhead - Front Side Nut
Operating temperature-55°C ~ 85°C
Body materialZinc
Housing colorNatural, Silver
Dielectric materialPolymethylpentene (PMP)
Center contact materialPhosphor Bronze
PackageBulk
FeaturesBoard Guide, Isolated
Impedance50 Ohms
Body finishNickel
Mating cycles500
Number of ports1
Shield terminationSolder
Contact terminationSolder
Center contact platingTin

Product details

The 5227222-1: Rated for 500 mating cycles, so it holds up on a panel that gets reconnected regularly.

The shield termination is solder, same as the centre contact. That means you solder the braid and centre conductor to the respective posts, not crimp.

Cable Compatibility and Mating

The 50 Ohm impedance means it pairs correctly with 50 Ohm BNC plugs and cables; a 75 Ohm BNC plug will physically mate but the impedance mismatch will cause a reflection at the interface. The body finish is nickel over zinc, which gives a consistent ground path through the shell.

Frequently asked questions

Where can I buy the 5227222-1 and what is the lead time?

Submit an RFQ for your quantity to get a firm delivery commitment.

Is the 5227222-1 compatible with RG58 or RG174 cable?

The 5227222-1 is a panel-mount jack with solder termination — it does not come pre-attached to any cable. It will mate with a BNC plug that is crimped or soldered to RG58 or RG174, provided that plug is a 50 Ohm BNC. The centre contact and shield are solder posts, so you would terminate the cable to a separate BNC plug and then mate it to this jack.

What is the difference between 5227222-1 and 5227222-2?

The evidence does not contain a specification for 5227222-2, so a direct comparison cannot be made from this record. The 5227222-1 is a single-port BNC jack with a bayonet lock, 50 Ohm impedance, 4 GHz bandwidth, and solder shield termination. The -2 variant may differ in plating, packaging, or a minor mechanical detail — confirm the exact variant against your BOM before ordering.