PIDG spade terminal, order code 52921, 22-26 AWG, #2 stud, tin-plated phosphor bronze contact, serrated termination, yellow nylon insulation, free hanging in-line, bulk.
| Parameter | Value |
|---|---|
| Series | PIDG |
| Mounting | Free Hanging (In-Line) |
| Terminal type | Spring, Snap |
| Wire gauge | 22-26 AWG |
| Color | Yellow |
| Contact material | Phosphor Bronze |
| Width - outer edges | 0.171\" (4.34mm) |
| Material - insulation | Polyamide (PA), Nylon |
| Package | Bulk |
| Features | Serrated Termination |
| Insulation | Insulated |
| Termination | Crimp |
| Parameter | Value |
|---|---|
| Stud (Tab size) | 2 Stud |
| Contact finish | Tin |
| Length - overall | 0.651\" (16.54mm) |
| Insulation diameter | 0.050\" ~ 0.082\" (1.27mm ~ 2.08mm) |
| Length - termination | 0.331\" (8.41mm) |
| Tongue inside opening | 0.086\" (2.18mm) |
| Length - ring center to termination | 0.206\" (5.23mm) |
The 52921: Tin-plated phosphor bronze contact, yellow nylon insulation rated for free-hanging in-line use, overall length 0.651" (16.54 mm).
The 52921 uses a #2 stud opening (0.086" tongue inside opening). The same wire gauge and insulation diameter are shared with the #4-stud 52922 (0.112" opening) and the #8-stud 52925 (0.164" opening) — pick the stud size that matches the terminal or bus bar hole pattern.
No — the 52921 uses a #2 stud (0.086" tongue opening) while the 52922 uses a #4 stud (0.112" opening). The wire gauge range and insulation diameter are identical, but the stud hole size differs, so the terminal will not fit a #4 stud without re-terminating to the 52922.