Backplane Header for CompactPCI Hot Swap
The TE Connectivity 5352332-1 is a Z-PACK A 22 header, 154 positions arranged as 110 signal contacts plus 44 dedicated ground pins across 5 + 2 rows on a 2.00 mm pitch. The press-fit termination means it gets compliant-pin stuffed into plated through-holes, no solder, which keeps the assembly clean for high-reliability backplane builds where rework access matters.
Press-Fit Assembly and Board Guide
Termination is press-fit only — the compliant pin compresses as it enters the plated hole, creating a gas-tight joint without heat. That makes it suitable for backplane panels where you want to avoid solder defects or reflow stress on the board. The housing includes an integrated board guide feature that aligns the header during placement, taking the shear load off the pins before they seat into the backplane.
Voltage rating is 500 Vrms, adequate for the signal levels on a CompactPCI bus.