Skip to main content
Log in
5415006-2 — TE Connectivity AMP Connectors product photo
TE Connectivity AMP Connectors

TE Connectivity 5415006-2 SMB Jack, 50 Ohm, 4 GHz, RG-316

MPN5415006-2
Active

TE Connectivity SMB jack, male pin, 50 Ohm, panel mount bulkhead, crimp termination for RG-316, 4 GHz, 500 mating cycles, nickel body, gold center contact.

$13.5200Ref. price · indicative, final on quote
StockIn Stock (42)
Lead timeIn Stock wk
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.
How we verify every order →

Specifications

5415006-2 Technical Specifications
ParameterValue
Mounting typePanel Mount
Connector typeJack, Male Pin
Fastening typeSnap-On
Voltage rating335 V
Frequency - max4 GHz
Mounting featureBulkhead - Front Side Nut
Cable groupRD-316
Operating temperature-65°C ~ 165°C
Housing colorSilver
Dielectric materialPolytetrafluoroethylene (PTFE)
PackageBulk
Includes5 pcs - 1 Connector, 1 Contact, 1 Ferrule, 1 Lockwasher, 1 Nut
Impedance50 Ohms
Body finishNickel
Mating cycles500
Insertion loss0.3dB
Number of ports1
Shield terminationCrimp
Contact terminationCrimp
Center contact platingGold

Product details

Connector identity and RF fit

The TE Connectivity 5415006-2 is an SMB jack with a male pin — not a BNC, despite the snap-on coupling that looks similar. It's built for RG-316 cable, terminated by crimp, and rated for 50 Ohm impedance up to 4 GHz.

Mounting and mechanicals

Panel-mount with a bulkhead flange secured by the front-side nut — the lockwasher keeps it from backing off under vibration. The snap-on fastening gives quick connect/disconnect in the field, and the 500 mating cycle rating means it'll hold up to regular test-bench or portable-equipment use without the gold plating wearing through.

Materials and environment

Nickel body finish resists corrosion in lab or light industrial environments. Gold-plated centre contact keeps insertion loss down to 0.3 dB at 4 GHz — clean signal path for RF test gear or short-run coax links.

Frequently asked questions

Is TE Connectivity 5415006-2 compatible with RG-316 cable?

Yes, the 5415006-2 is designed for cable group RD-316, which is the standard designation for RG-316. The crimp termination matches the cable diameter and dielectric.

What is the impedance of 5415006-2?

The 5415006-2 is a 50 Ohm SMB connector, rated to 4 GHz maximum frequency with 0.3 dB insertion loss.

What is the mounting type and fastening of 5415006-2?

Panel mount with a bulkhead flange, secured by a front-side nut and lockwasher. The mating fastening is snap-on.