Skip to main content
Log in
TE Connectivity AMP Connectors 6-520315-4 — FFC / FPC Cable Assemblies

6-520315-4 TE Triomate FFC Connector 14 Pos 2.54mm Pitch

MPN6-520315-4
Active

TE Connectivity AMP Connectors Triomate, 14-position FFC/FPC connector, 0.100" (2.54mm) pitch, vertical through-hole with kinked pin termination, tin-plated phosphor bronze contacts, rated 1 A at 250 V, UL94 V-0 housing.

$1.5600Ref. price · indicative, final on quote
TE Connectivity AMP Connectors 6-520315-4 datasheet (PDF)
RoHSROHS3 Compliant
SeriesTriomate
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

6-520315-4 key specifications
ParameterValue
SeriesTriomate
MountingThrough Hole
Cable end typeStraight
Flat flex typeFFC, FPC
Connector (Contact type)Contacts, Vertical - 1 Sided
Voltage rating250V
Current rating1A
Operating temperature-55°C ~ 105°C
Housing colorBlack
Contact materialPhosphor Bronze
Housing materialPolyester Thermoplastic, Glass Filled
Height above board0.273\" (6.93mm)

All specifications

6-520315-4 additional specifications
ParameterValue
Material flammability ratingUL94 V-0
Pitch0.100\" (2.54mm)
PackageBulk
TerminationKinked Pin
Mating cycles25
Contact finishTin
FFC, FCB thickness0.13mm ~ 0.38mm
Positions14

Product details

Triomate 14-position vertical FFC/FPC connector

The 6-520315-4 is a 14-position, 0.100" (2.54mm) pitch FFC/FPC connector from the TE Triomate series, designed for vertical board-mount with through-hole kinked pin termination. It accepts FFC or FPC cables 0.13mm to 0.38mm thick and mates with a straight cable end — the one-sided contact arrangement suits single-sided flex circuits. The UL94 V-0 glass-filled polyester housing provides flame resistance for compliance with safety standards.

Fit and termination details

The 0.273" (6.93mm) height above board is a fixed dimension; plan the z-height clearance around it. The 2.54mm pitch is wide enough for easy hand-routing on two-layer boards.

Mating cycle and contact finish

In a product that stays mated for its life, 25 cycles is more than adequate. The tin contact finish on phosphor bronze base metal is cost-effective for indoor, non-corrosive environments; tin is not recommended for high-vibration or repeated disconnect duty.

Frequently asked questions

What is the pitch and position count of 6-520315-4?

The pitch is 0.100" (2.54mm) and it has 14 positions. This is a standard footprint for signal FFC/FPC connectors in the Triomate series.

Does 6-520315-4 support different FFC thicknesses?

Yes, it accepts FFC or FPC cables with a thickness range of 0.13mm to 0.38mm. The one-sided contact arrangement is designed for single-sided flex circuits.