The TE Connectivity 6116522-3 is a 2-port, right-angle RJ45 jack with an 8p8c (8-position, 8-conductor) interface — the standard keyed footprint for Ethernet patch cables.
Through-hole solder termination anchors the jack for repeated plug/unplug cycles. A board guide aligns the jack during placement.
The shielded shell with EMI finger is the part that actually matters for passing radiated emissions in a metal enclosure. The finger contacts the panel ground before the signal pins seat, which means the shield current from the cable braid has a low-impedance path to chassis ground — that keeps common-mode noise from coupling into the differential pairs. No LED indicators on this variant, so the jack itself is just the signal path; link/activity lights go elsewhere on the board.