TE Connectivity Multimate III+ series stamped pin contact, 66361-4, crimp termination, 14-18 AWG, 30.0µin gold plating, brass, bulk.
| Parameter | Value |
|---|---|
| Type | Stamped |
| Series | Multimate III+ |
| Wire gauge | 14-18 AWG |
| Contact material | Brass |
| Package | Bulk |
| Pin or socket | Pin |
| Contact finish | Gold |
| Contact termination | Crimp |
| Contact finish thickness | 30.0µin (0.76µm) |
Crimp termination requires the correct tooling for the 14-18 AWG strand range — the stamped barrel geometry is designed for a specific crimp height and pull-off force. Strip length and insulation support must match the contact body to avoid partial insertion or back-out in the housing.
The 66361-4 accepts 14-18 AWG wire. Use the correct crimp tool and die set for that range to meet the specified pull-off force.
The 66361-4 is a Multimate III+ stamped pin. It mates with the corresponding Multimate III+ socket contact and loads into any Multimate III+ housing cavity designed for this contact family. Confirm the cavity arrangement and keying of your specific housing before assembly.